June 15m 2016
UPDATED October 31, 2019

To configure Maxpay into your Lime Light CRM, you will go to Settings > Providers and select "Add New Provider Profile" A box will pop up where you will need to select "Payment/Gateway" as the Type, and Maxpay from the providers within the list.  Click on “Add Gateway” and fill out the gateway parameters.

These parameters are briefly described here for your reference:

Alias:  This is for internal purposes only; it helps you identify your gateway account among several others in your CRM.

Merchant Account:  This will be provided to you by Maxpay.

Merchant Password: This will be provided to you by Maxpay.

3D Secure: Select whether or not you want to use 3D Secure with Maxpay.

Currency: Maxpay currently supports USD, EUR, CAD, CHF, CZK, DKK, JPY, NOK, NZD, PLN, SEK, ZAR and GBP currencies.

Test Mode: Select whether or not you want to use Maxpay in Test Mode.

Use Pre-Auth Filter?: Set to YES only if using the Pre-Auth Filter service through this gateway account. Optional.  NOTE - If you select YES to use the Pre-Auth Filter, the ‘Void Pre-Auth’ Filter will populate.  Void Pre-Auth: Set to YES if you want to void a successful Pre-Auth immediately; set to NO if you want to hold a successful Pre-Auth and capture it at the rebill charge. Optional

There are 2 Required Fields on the Merchant Account Details tab.
     *   Descriptor - This will be the MID Descriptor
     *   Customer Service Number - The customer service number assigned to the MID

There is 1 Required Field on the Limits and Fees tab
     *   Global Monthly Cap - This will be the sales amount allowed monthly on this MID 

To maximize the efficiency of LimeLight Reporting Analytics we suggest you take a moment and fill out the rest of the fields. These will all be used in LimeLights profitability reports.

For field definitions on all of the fields on the Merchant Account Details Tab and the Limits & Fees Tab - click here

Once your gateway profile has been created, then you will go through your campaigns and assign the gateway to the corresponding campaign(s).

  

      

  

    

  

  

Did this answer your question?